IEC 61851 EVSE Testing Equipment Connector Plug Cable Strain Relief Test
|
IEC 61851 EVSE Connector Plug Cable Strain Relief Testing Equipment Complied Standards & Clauses IEC 61851-1 2017 Electric vehicle conductive charging system - Part 1: General requirements clause 11.6. IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11. IEC60309-1: 2012 clause 23.3, etc. Equipment Overview This cable strain relief test equipment is used to test......
Sinuo Testing Equipment Co. , Limited
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector
|
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test...
Sinuo Testing Equipment Co. , Limited
|
IEC 62196 EVSE Adapter 16A 32A EV Charger Connector Type 2 To TESLA EV Adapter
|
EVSE Adaptor 16A 32A Electric Vehicle Car EV Charger Connector IEC 62196 Socket Type 2 To TESLA EV Adapter For Model 3/Y/S/X EV Adaptor 16A/32A 250V Type2 to tesla Adapter Rated ......
Chengdu Sixpence Technology Co.,Ltd.
|
IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm
|
IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm 1. Introduction of apparatus for checking damage to VE conductors: The apparatus for checking damage to EV conductors is designed to meet the test requirements of IEC62196-1 clause 13.3 figure 12, IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause 6.9.7.3 (for flexion test......
Pego Electronics (Yi Chun) Company Limited
|
SAE J1772 To IEC 62196 EVSE Cord
|
... of 7.4 kW. This charging cable is ideal for all electric cars and plug-in hybrids, especially for charging at public charging stations. 2)All charging cables have been tested by us and have a...
Chengdu Heiu Technology Co., Ltd.
|
IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel
|
Product Description IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel Product Overview: The Test Plugs Are Required By IEC 62196-: 2022 Clause 14.1.5, 14.1.6, According To The Relevant Standard Sheets, Shall Have Finely ......
KingPo Technology Development Limited
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test......
Dongguan Kingpo Technology Limited
|
IEC 60669-1 Test Equipment Self Ballasted Lamp Bulb Load Box Three Test Stations
|
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 62133 Battery Testing Equipment Electric Vibration Testing System
|
..., fire or explosion. The electrodynamic vibration test system is a precision test equipment that simulates the actual working environment of a battery. The vibration test system consists of four parts: vibration test bench, power amplifier, controller and...
Guangzhou HongCe Equipment Co., Ltd.
|
Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable
|
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
