10Gb/S 1310nm Duplex LC Single Mode SFP Optical Transceiver

10Gb/S 1310nm Duplex LC Single Mode SFP Optical Transceiver

10Gb/s 10km SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB-LD, Single mode

Features:

• Supports 9.95 to 11.3Gb/s bit rates
• Hot-Pluggable
• Duplex LC connector
• 1310nm DFB transmitter, PIN photo-detector
• SMF links up to 10km
• 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
• Power Supply :+3.3V
• Power consumption<1.5W
• Temperature Range: 0~ 70°C
• RoHS compliant

Applications:

• 10GBASE-LR/LW Ethernet
• SONET OC-192 / SDH
• 10G Fibre Channel

Description:

SFP+ 10G LR is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The SFP converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.

The high performance 1310nm DFB transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 10km links.

The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

Absolute Maximum Ratings

Electrical Characteristics (T_OP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Per SFF-8431 Rev 3.0

3. Into 100 ohms differential termination.

4. 20%～80%

5. LOS is an open collector output. Should be pulled up with 4.7k – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.

Optical Parameters(T_OP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)

Note:

1. Average power figures are informative only, per IEEE802.3ae.

2. TWDP figure requires the host board to be SFF-8431compliant. TWDP is calculated using the Matlab code provided in clause 68.6.6.2 of IEEE802.3ae.

3. 12dB reflection.

4. Conditions of stressed receiver tests per IEEE802.3ae. CSRS testing requires the host board to be SFF-8431 compliant.

5. Receiver overload specified in OMA and under the worst comprehensive stressed condition.

Mechanical Dimensions:

Corporate profile

Shenzhen CY COM Product Co., Ltd is a high-tech enterprise specialized in designing, manufacturing and selling fiber optic telecommunication products. The products we are producing include fiber optic connector, fiber optic patch cord, pigtail, optical fiber adapter, attenuator, FBT/PLC splitter, optical fiber closure, terminal box and ODF. These products are wide used in all kinds of fiber optic telecommunication field, such as telecom, CATV, fiber optic data transmission, LAN ect.

Our factory area covers 2000 square meters,with more then 300 production workers and 200 office stafffs.The annual output of the fiber optic patch cord is 6 million core and 5 million pieces adapters.The product are sold to more then 150 countries and regions in the word.Customers are from the state and regional telecommunication operators,electrice power,railway,military network,oil,media and other fields.

Main partaners

HUAWEI Technology Co., Ltd.

Zhongxing Telecommunication Equipment Corporation（ZTE）

FiberHome Technologies Group

SUNSEA TELECOMMUNCIATIONS CO., LTD

Famous communication enterprises and other domestic and international Communication engineering company,Equipment company and Trading Company

Certificate and Honor

ISO9001:2015; ISO14001:2015; High-tech enterprise cert; Letter patent