Vbgt 110302 Turning Carbide Inserts Good Stability Cutter Insert

Quick Detail:

Efficient processing

Durable

Complete specifications

Sharp and wear-resistant

Good stability

High finish

Description:

The turning carbide inserts have a unique 3D front angle design to ensure smooth chip control, smooth chip flow, effectively reduce cutting resistance, and ensure a longer tool life; The large rake angle design of the upper cutting edge reduces the cutting resistance, thereby prolonging the tool life; The polishing treatment of R blade top surface can better control the chip discharge flow and reduce the generation of chip accumulation; Large front angle corrugated chip clamping groove - low cutting resistance; The unique front angle design has efficient chip breaking and smooth chip flow; Unique upper surface and 3D design - longer tool life and better surface roughness; The wavy sharp cutting edge has dispersed cutting resistance and long tool life; The upper surface is polished and has excellent cutting performance, which can reduce chip accumulation and ensure smooth chip.

Specifications:​

Notice:

1.The turning carbide inserts shall not be collided or dropped on the ground and must be handled with care.

2.Before installing the turning carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.

3.After installation, it is necessary to confirm whether the central hole of the turning carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.

4.When using, do not exceed the specified high speed

5.When the turning carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: