Hollow design LED Driver 24V 72W 3A Indoor type LED module IP20

24V 72W 3A LED Driver Indoor LED Light Strip, Wash Wall Light LED Power Supply

Quick Detail of LED Driver:

• Indoor aluminum hollow design mini slim shape type
• AC/DC switching 12V 100W 8.5A single-switch LED driver
• AC input voltage: 170~250VAC
• 1600V High voltage test, full loading test and old aging test and constant voltage driver apply for LED strips light, light belt, LED module, light box
• CE, ETL approvals
• Unit Size: 15.9*9.8*4.2CM
• Unit Weight: 337g

Description of LED Driver:
Constant voltage power supply is power circuit that controls output voltage at a constant level. It always provides a constant voltage regardless of the load and is widely used as power supply for electronic circuits.

All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

AC/DC LED driver is one kind of power supply for LED light fixtures and bulbs that have different voltage requirements. This driver controls the amount of current that flows through LED unit and ensures that LED unit gets the right amount of voltage and current to operate efficiently without getting damaged.

Specifications of LED Driver:

Notices:
1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).
2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.
3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

24V LED drivers related models list:

Applications of LED Driver:
Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, LED tube, offices , hospital , schools , factories , plants, shopping malls, supermarkets, kitchen, fair cabinet and so on.



FAQ:
1. How many kinds of led drivers you produce?
A: There are many kinds of led drivers: indoor type, rain proof type, waterproof type, ultra thin type, high power type.
2. Do you have CE, ETL approval?
A: Most of products have CE approval, some products have ETL approval.
3. Can I place a sample order?
A: Yes, sample order is available after full test and before delivery. If big quantity, it maybe need 12-18 working days.
4. What about the lead time?
A: 3-5 days for Sample, 8-12 working days for mass production.
5. Which tests do you carry out in your factory?
A: We usually do overload test, 1600V high voltage test and 100% old age test.
6. What is MOQ for led driver?
A: MOQ usually is 100-200pcs except sample order.

Ripple noise (ripple noise voltage) testing

2.1 Definition:

Maximum (P-P) or effective value of the AC voltage component overlapped over DC output voltage.

2.2 Test conditions:

I/P: Nominal

O/P : Full Load

Ta: 25 ℃

2.3 Test circuit:

2.4 Test waveform:

2.5 Description:

2.5.1 The shorter the oscilloscope GND line, the better. The test line should be far away from the PUS.

2.5.2 Using a 1:1 Probe.

2.5.3 The Scope's BW is generally set at 20MHz, but it is better to set the BW to the maximum for the ripple noise of the current network products.

2.5.4 Noise and the use of the instrument, the environment is very different, so the test must indicate the test location.

2.5.5 Test ripple noise shall not exceed the original specification value +1%Vo.

Leakage current testing.

3.1 Definition:

Input the current flowing between the chassis (the chassis must be grounded).

3.2 Test conditions:

I/P: Vin Max) x 1.06 (TUV) / 60 hz

Vin max.(UL1012)/60Hz

O/P: No Load/Full Load

Ta: 25 ℃

3.3 Test circuit:

3.4 Description:

3.4.1 Both L and N need to be measured.

3.4.2 UL1012 R value is 1K5 and TUV R value is 2K/0. 15 uf.

3.4.3 Leakage current Specifications TUV: 3. 5 ma, UL1012:5 ma.

Shenzhen XingJia xinyuan Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, production and sales of switching power supply from 2009. It chooses the best raw materials, implements the most stringent production and installation process, and continuously develops and launches new products. The products have passed the ISO 9001 certification

Since its inception, we have adhered to the concept of "customer-centered" company, integrity, quality, satisfactory service, the strongest technical support, the best price is my purpose and rely on their own exquisite technology to devote themselves to the research, development and production of switching power supply.

Our company integrates scientific research, production and sales of switching power supply. It has development department, production department and quality inspection department. Each department takes strict responsibility at all levels to make its products occupy a place in the fierce market competition. The company actively carries out and implements the policy of integration of production and marketing, seizes market opportunities, and strives for rapid development and continuous expansion in the fierce market competition, large scale production and independent innovation capability. The product adopts PWM high frequency pulse width modulation technology after mature standardized production, strict 100% on-load aging and high-low voltage impact test, complete test records and other strict process flow. The product is widely used in telecommunications, power, aerospace, industrial control systems, postal communications, medical equipment and other fields, and is a brand deeply trusted by customers.