fiber optic sm e2000 attenuator

Brand Name:OEM and ODM

Model Number:E2000 APC

Place of Origin:Guangdong, China

... network.Fiber Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements.This may occur because of a mismatch between the transmitters/receivers (transceivers, media ...

Brand Name:KCO, Kocent Optec Limited

Model Number:E2000, E2000/APC

Place of Origin:Guangdong, China

... by repeated tests. It is interchangeable with similar devices built to the same standards. - We provides an extensive line of fiber optic adapters that offer superior low loss performance with very high repeatability. - These products are designed and

Brand Name:YINGDA

Model Number:ATTN-MU-01-B07

Place of Origin:china

... end is connector type, the other end is adapter type (known as male to female) . Male to female type fixed attenuator is mainly applied to the optical link optical power attenuation in order to get the target required power. It mainly have types: SC,

Brand Name:New Light

Model Number:FC / ST / LC / SC / MPO

Place of Origin:China

... 0.3dB Return Loss: ≥ 50dB Package include:1 X SC Male to LC female Adapter(SM) Product description Widely apply on Visual Fault Locator, Optical Power Meter, Fiber Optic Instrument test interface conversion. There are single mode multimode, PC and APC.

Brand Name:EVERTOP

Model Number:E2000

Place of Origin:China

E2000/PC Singlemode Simplex Fiber Optic Adaptor We supply E2000 Singlemode and Multimode Fiber Optic Adapter. Model Number :E2000 Sleeve Type : Ceramic loss: ≤0.2dB Polishing : PC Model : SM, MM Description: Good durability Good interchangeability ...

Brand Name:FOCABLE

Model Number:E2000/APC-E2000/APC SM Duplex Fiber Patch Cord

Place of Origin:China

... standard fiber optic connectors are used for telecommunications, CATV, LAN, MAN, WAN, Test & Measurement, Industry, Medical and Sensors. E2000 fiber optic connectors comply with IEC 61754-13 & CECC 86 115-801 standards. They are well known for general,

Brand Name:OEM or OMC

Model Number:E2000 APC to E2000 APC Simplex With Full Flange Plastic

Place of Origin:China

Fiber Optic Adapter E2000 APC To E2000 APC Simplex Mating Sleeve With Full Flange Plastic Coupler E2000 Adapter are developed to couple and mate two E2000 connector plugs. The E2000 fiber optic adapter features injection-molded PBT housing, rated to the ...

Brand Name:CY COM

Model Number:E2000

Place of Origin:Shenzhen China

Telecommunication 2.0mm APC UPC Fiber Optic Pigtail E2000 Fiber Optic Pigtail E2000,The ferrule is protected by the integrated spring-loaded shutter Description: Fiber optic pigtail are suited for equipment jumper cord, cross connects, and work area ...

Model Number:E2000 - E2000 SM SX green color adapter

Place of Origin:China

Optic Fiber Adapter E2000/APC Singlemode FTTX Use Singlemode Green Color Product Description: Fiber optic adapters are used to provide a cable to cable or cable to equipment fiber optic connection. Fiber Optic Adapter is a fiber optic connector for connection components, the product is very variety, including FC, SC, ST, LC, MTRJ, as well as carry out the transfer between each other such as: ST-SC, FC-ST. Specification: item no : E2000-E2000...

Brand Name:DYS/OEM

Model Number:LC/APC

Place of Origin:GuangDong Cina

...Fiber Optic LC / APC Attenuator With Test Equipment Quick Detail: Name:LC/APC Brand Name: DYS/OEM Delivery Detail:In 3 days Singlemode Male to Female fiber optic LC/APC attenuator Fixed plug in optical attenuators (Fixed Build-out or Fixed Male to Female) use doped fiber to provide fixed level of optical attenuation. Typical attenuation values are between 3 and 20 dB. It is used in optical systems where the optical...

Brand Name:HICORPWELL

Model Number:E2000 APC Fiber Optic Pigtail

Place of Origin:China

...Fiber Optic Cable E2000 APC UPC Pigtail Optical Fiber Cable Connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at both end. The type of cable fiber and connector and the length of the patch cords can be freely specified by the customer as shown below. Pigtails are used for terminating fiber optical cables by splicing them the fibers...

Model Number:Fiber Optic Attenuator

Place of Origin:Shenzhen, China

Fiber Optic Accessories FTTH Passive Optic Device Fiber Optic Attenuator​ This series of flange attenuator has the same appearance as a regular fiber optic adapter. It achieves attenuation of optical signal by setting up an attenuation film inside a fiber optic adapter to ensure incomplete touch with fiber connectors. Due to this principle, the flange attenuator is a great fiber optic attenuation solution for fiber optic patch cords in an optical

Brand Name:FOCC

Model Number:FOCC - FVP003

Place of Origin:China

... in steps of 0.05dB over a wide attenuation range of 2.5dB to 60dB. In addition, this fiber optic variable attenuator provides the low insertion loss, high return loss, wide attenuating wavelength range and excellent attenuation accuracy needed in a

Brand Name:CY COM

Model Number:E2000

Place of Origin:Shenzhen China

Telecommunication 2.0mm APC UPC Fiber Optic Pigtail E2000 Fiber Optic Pigtail E2000,The ferrule is protected by the integrated spring-loaded shutter Description: Fiber optic pigtail are suited for equipment jumper cord, cross connects, and work area ...

Brand Name:CY/OEM

Place of Origin:Hubei

Model Number:LC Fiber Optic Attenuator

...: Blue, green, metal Attenuation range: 0-30 dB Connector: FC, SC, ST, LC, MU, etc Specifications 1. Stable performance; 2. Low attenuation error,high return loss; 3. Bellcore standare 4. easy to operat Features 1) High precision. 2) Good stability. 3)

Brand Name:QualitY or QY

Model Number:QATSC-APC

Place of Origin:Dongguan China

... 1. Low Insertion Loss and High Return Loss 2. Easy to Handle 3. Environment Stable 4. Customer Defined Specifiication Applications 1) CATV Fiber Optic Sensor 2) Fiber to Home 3) Telecommunication Networks 4) Local Area Networks(LANs)

Model Number:LC/UPC Male To LC/APC Female

Place of Origin:China

...: Telecommunication networks Data procession networks Test equipment optical fiber sensors LAN CATV,etc. Technical data: High attenautor precision, good compatability High reliability & stability Compliance with RoHS,...

Brand Name:KCO

Model Number:MPO, MPO/APC

Place of Origin:Guangdong, China

Fiber Optic Loopback Plug Attenuator 1 - 20 dB for 40G 100G QSFP Product Descriptions: - Kocent Optec Limited supply high quality of MPO MTP Single mode and Multimode Fiber Optic LoopBack attanuator. - MPO loopback attenuator is applied to 40G/100G fiber optical network link test. - The devices are available for 8-Fibers, 12-Fibers, 16-Fiber, 24-Fibers or 32-Fibers versions and customer specified pinout configurations, as well as multiple fiber

Brand Name:KEXINT

Model Number:MPO-ATT

Place of Origin:SHENZHEN

..., and other equipment with using MPO interconnection. Technique of this product makes network's composition more concise than those of conservative way which is the connection method of Attenuator independently in each channel, as downsizing the volume and