Sign In | Join Free | My components-electronic.com
components-electronic.com
Products
Search by Category
Home > Refrigeration & Heat Exchange >

APJBQ Mixing Drilling Mud High Pressure Shear Pump Units

Categories Drilling Shear Pump
Brand Name: AIPU
Model Number: APJQB
Certification: API Q1, API ISO 9001, ISO14001, OHS18001, HSE
Place of Origin: CHINA
MOQ: 1 set
Price: USD5072~7660/Set
Payment Terms: L/C, T/T
Supply Ability: 100 Sets per month
Delivery Time: 1 week
Packaging Details: sea worthy pallet, plywood box, or frame case
Installation: Vertical
Drive: Explosion proof motor
Connection: Belt
Impeller design: Special sharp edges
Color: Cyan, blue, green, red, yellow, orange, etc.
Electrical system: Can be customized
Feature: High Pressure Units
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    APJBQ Mixing Drilling Mud High Pressure Shear Pump Units

    APJBQ Mud High Pressure Shear Pump Units For Mixing Drilling Mud


    The Shear Pump is used to shear, refine, mix polymer, bentonite, etc drilling mud material. It can remove "fish-eye" to help to drill fluid achieve high property for oil drilling. Sunbo Shearing pump can save over 30% bentonite. As one very important equipment within the drilling fluid circulating system, shearing pumps perform the dual function of cutting and pumping, making the drilling fluid ideally suited for every drilling requirements of reducing solids size, and protect its downstream equipment.


    Drilling mud shear pump is specially used to shear polymer and clay in drilling fluid. The polymer (or clay) in the drilling fluid system should be sufficiently cut in advance and then into the drilling fluid system, improve the performance of drilling fluid to give full play to its effectiveness. If not fully shearing, the polymer will block the shake screen in the first cycle. It will lose a massive amount of polymer, increase drilling cost, and may also make the large size of solid particles in drilling fluid difficult to be removed. Shear pump can make the polymer reduced by more than 15%, and the bentonite reduced by more than 30%. And it can also reduce mud cake and fluid loss, reduce drilling fluid shear rate, improve the gel strength, so as to achieve the advanced level of similar products abroad.


    Shearing pump is designed to reduce cost of mixing polymers and clays while improving mud properties, it shears the polymers eliminates fish eyes and prevents polymer chaining which can’t pass through the shaker screen. The APJQB series shearing pump is based on centrifugal pump APSB6X5. The flow rate is up to 440-528GPM and 35-45m lift. The difference is the motor power. Overall size is about 1150x1100x1500mm


    The shear pump is specially designed with the impeller holding jags to process the drilling mud mixed with clay and polymer.


    Specification of APJQB6545 shearing pump

    ModelAPJQB6545
    Motor75HP
    Pump6X5
    Flow rate528GPM
    Lift/Head45m
    Dimension1150x1100x1500mm
    WeightAbout 980kg

    Details of drilling mud shear pump


    Shearing pump consists of the impeller, casing, packing, shaft, belt, pulley, motor, base, and so on. The difference with other pump impeller is a more complicated structure. There are axial whirl flow, fluids reserve compartment, pump wheel, pressure cabin, shearing plate.


    The axial flow whirl provides a certain quantity of fluids to the pump wheel and reserve cabin, 50% of this part fluids will flow into the reserved cabin, and the other half part flows into the casing. Pressure cabin is a special design to make sure fluids cabin holding drilling mud. The fluids flow is parallel to the shearing plate and introduces high flow velocity


    Why select APJQB series shearing pumps?

    There are many features of the shearing pump as follows. High efficiency, high flow rate, high lead, mechanical sealed. It can help get higher performance and a better shearing effect. Faster hydration and dilution process, meet the requirements of many different job site. Saving the cost and time for the user. For the bentonite use, it can save cost up to 30%


    Operating the AIPU shear pump, the shearing and hydration system will be a mature and complete system.

    Shear pump for drilling fluids solids control


    APJQB series Shear Pump is special-purpose equipment of the solids control system which can meet all customers’ requirements of preparing drilling fluid for the well drilling. This shear pump manufactured by Aipu company is used to treat the high property mud, make the mud to obtain good rheological properties and cut the drilling cost as much as possible. This ideal solids control equipment designed by GN’s engineers has high performance and gained customer’s high evaluation.

    Moreover, the shear pump can be customized according to practical working conditions and the user's special requirements. For example, it can be fit on a big rectangular base or a smaller area base. And the vertical angle can be adjusted accordingly.


    If you have any demand for drilling fluids shearing pump, Or you are interested in any other mud equipment. Please feel free to contact AIPU Solids. Trust you will get the real cost-effective solution at the best rate.


    shear pump unit


    Quality APJBQ Mixing Drilling Mud High Pressure Shear Pump Units for sale
    Send your message to this supplier
     
    *From:
    *To: Shaanxi Aipu Solids Control Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0